Tuesday 11 January 2011

Making Bookcloth for Bookbinding – heat-bonded method

Hello all,  I mentioned a little while ago, that I make my own bookcloth for bookbinding and that I use a fairly simple method that has recently been “discovered” by many in the Bookbinding Community.  It’s not my own idea, but one that was passed on by others, and as it’s common knowledge (so nobody’s “property”), I think it’s fine to pass it on again!

A few people have asked about this and I thought I would make a tutorial.  This is quite a long tutorial, as I wanted to cover everything, but the method is actually very straightforward.

I have used lots of photos, to make it as clear as I can. I hope you find it useful.

* * *

Background Information

Traditional Bookcloth is made using some kind of glue to stiffen and strengthen, or fix a fine paper to the back of, the book-covering fabric.  The reason for doing this is that fabric, fixed to the book boards by itself, would stretch unevenly, possibly fray and probably not look very good.  By coating it with a special glue, or backing it with paper, the fabric is stabilised – it won’t stretch or fray – and will stick smoothly to the supporting cover boards.

However, making bookcloth with old-fashioned “wet” glues is not very easy.  The glue can soak through the fabric, spoiling its appearance.  If you miss a bit, you can end up with bubbles on the surface of your book cover.  Traditional glues can be vulnerable to attack from insects, who like to munch on it (it’s made of wheat or rice starch)! It also needs a while to dry out before it can be used.  

Kristin Crane, a bookbinder from Rhode Island, with a lovely shop on Etsy, wrote a very clear, concise tutorial about making bookcloth using the wet glue method -  find it here. (in fact, I should perhaps take a leaf out of her book - I don't seem to be able to write "concise" blog posts about anything!).

The Traditional methods do still have a big place in Bookbinding and it would be very sad to lose these tried and tested methods of working, which (when done skilfully) produce high quality products that last for years and years.  However, for many projects, the old paste method of making bookcloth doesn’t have to be used.  So long as the materials used are of “archival” quality – ie. acid free / neutral ph, so that the glue, fabric and paper used doesn’t attack the book inside the cover – more modern adhesives can be used with great success.

This method uses a modern, dry adhesive, which comes in the form of a fine web of glue, which has been sprayed onto a parchment paper support.  It is commonly used in making clothes, quilting, applique and for repairs, as it gives even adhesion and strength.  It is also pretty much invisible from the front – a big advantage – and does not fray at the edges, which means it is helpful for fiddly little bits of fabric, or those that are soft and fray easily. 

You can use almost any close-weave fabric that you choose for your book-binding projects.  Suitable fibre types are linen, cotton, poly-cotton, rayon, polyester or silk.  Nylon and polyamides are not really suitable for this heat-bonded technique, though you should be able to use them as covering material for a book, if you attach a backing paper with glue (you could try a spray craft-adhesive for this).
 
It is worth trying out this method on a test-piece of your fabric, before committing to the whole piece, just to be sure it will work out.

Be aware, however, that there are a number of specialist bookbinding supply companies, who offer ready-made bookcloth, in a wide range of types and colours, at reasonable prices.  Many of these accept orders over the internet.  If you are not making the bookcloth for aesthetic reasons, it may be as cheap to purchase it ready-made.  You should be able to obtain samples of your possible choices, before committing to a larger purchase.

100111_Bookcloth
This material is known as “Wonder web, Bondaweb or Wonder Under”, depending on where you live (it has lots of other names in languages other than English, but I don’t know those!).

You can buy it in haberdashery, dressmaking, fabric or craft stores.  It’s usually sold by the metre or yard; the pieces I buy are 46cm / 18” wide.  It can easily be cut to size, with sharp scissors and can be stored rolled up with its paper backing still attached.  However, the lady in my local shop tells me it doesn’t store well for long periods, so only buy what you will need in the next couple of months.

I had asked what it would cost to buy a roll of the stuff.  Her response rather put me off that idea, as a full roll is pretty long and I wouldn’t use it up very quickly.

I was further put off by the cost – over £100 a roll! By the metre / yard, it’s more affordable – mine cost me £3.95 a metre, but it may well be cheaper elsewhere.

This does add extra cost to your projects – if you are making things to sell, do remember to add this into your calculations, as well as the cost of the actual fabric, remembering that most fabrics are wider than 46cm/ 18” (although you only need to make as much bookcloth as you need for your project, cutting fabric and Bondaweb to size).
 
I also save money on fabrics, by buying “Fat Quarters” at my local quiltmaking suppliers (a “Fat Quarter” is where a yard/metre of fabric is cut from the roll, then cut across and vertically, to make four quarter-yards/metres – as opposed to cutting straight across the whole width of the fabric at quarter-yard/metre intervals).  This gives me nice, almost square pieces of fabric at reasonable cost, which are more than enough for my projects.

Just a further note.  I was initially offered a slightly different product, as the Bondaweb was out of stock.  When I looked at it, I decided not to use it, as the “web” of adhesive was actually formed in a small grid pattern.  I thought this might well show through some of my fabrics, giving a raised pattern to the bookcloth.  The Bondaweb is very fine and this problem would not arise.  There may be similar products available, but I would suggest you check the density of the glue and make certain it is acid-free/ archival quality before you buy it.

* * *
 
Method

100111_Bookcloth_1
Cut your Bondaweb and fabric to size, allowing enough for your project and including any hems/edges that you need to fold over your boards etc.

Lay it adhesive-side down / paper side up, over the back of your fabric, on a heat-proof, smooth surface. If you can’t use an ironing board, use a worktop or table, protected with a piece of heat-proof blanket or a few thick cotton tea-towels.

100111_Bookcloth_2  100111_Bookcloth_3
If your piece of Bondaweb isn’t big enough, you can add an extra strip.

Once the first piece is attached, run a finger nail under the edge of the backing paper, to lift it slightly,

100111_Bookcloth_4
then push the new piece just under this edge, so you won’t have any gaps.
 
100111_Bookcloth_5 
Use an iron at the hottest setting for your fabric (remember that cotton and linen can take a much hotter iron than rayon, polyester or silk).
 
Press the iron onto the backing paper, which will fix the Bondaweb in place at this point; you can then iron over the rest of the paper, keeping the iron moving, so that you don’t burn the materials.

100111_Bookcloth_6
This photo shows the Bondaweb half-done.  The left-hand area is attached – you can see the back of the fabric quite clearly; the right side has not been ironed yet, so it’s still cloudy.  You’ll be able to see where the glue has been melted by the iron, so you can go over any cloudy bits again.

100111_Bookcloth_6a 
Let it cool down, then test the corner, to make sure the backing will peel off easily.

100111_Bookcloth_6b
Detach the backing paper by peeling it away.  Normally it will peel off in one big sheet. Occasionally you’ll get a bit that rips away, but it should come off if you gently scratch it with your finger nail.  The backing paper is good as a non-stick surface for projects, or as “glueing paper”, so don’t throw it away.

If you look closely at the photo above, you can see the darker red edge of fabric, where there is no glue – the Bondaweb has left a thin, white coating of adhesive over the back of the fabric.

* * *

Backing the Bookcloth

You need to back your cloth with a firm, strong, but fine and lightweight paper.  Use paper that is finer and lighter than your fabric, or you will end up with a heavy and unusable bookcloth.

Please note that the kind of tissue papers used as gift-wrap, packaging etc is not suitable for bookcloth.  First and foremost, the majority of these papers are acidic and the acid in them will attack your fabric, causing discolouration.  Secondly, they have no strength and are likely to collapse once you start to work with the bookcloth.

100111_Bookcloth_7
I use a fine Thai mulberry tissue, like this one: http://store.falkiners.com/store/product/2415/Khadi---Thai-Mulberry-TP1/
or this: http://store.falkiners.com/store/product/2139/Bib-Tengu-jo-12gsm/ – this is my favourite, and is the tissue shown in these photographs.

100111_Bookcloth_8
As you can see from the photo, the paper is very thin and almost transparent.  However, it is also quite strong and durable.

100111_Bookcloth_9
Cut the tissue to size and lay it on top of the glue layer on your fabric.  Try not to leave any glue uncovered, as it will stick to your iron.

100111_Bookcloth_10 
If there is a bare patch, you could lay a small piece of the tissue paper over this.  Let it overlap very slightly, to avoid sticky problems and holes in your bookcloth backing.

100111_Bookcloth_11
Once again, use a hot iron, at the highest temperature possible for your fabric type, to activate the glue and adhere the backing tissue to the fabric.

100111_Bookcloth_12
The darker areas on the photo are where the glue has activated and bonded the paper. The cloudy parts are where it hasn’t been ironed over yet.

100111_Bookcloth_13
The paper will be stuck firmly to the fabric, forming a nice firm bookcloth. This can be cut with sharp scissors, folded and creased.  You can apply glue to the back – carefully and not too wet – to stick it to your book boards, though sometimes, especially with silks, I prefer to glue the boards, then carefully lay the bookcloth on top, to avoid the glue soaking through to the front.

100111_Bookcloth_14
There is a tiny overlap here, where I had to cut two pieces of paper to fit the fabric. This can be trimmed with very sharp scissors; however I generally find that it doesn’t show on the front, as the fabric is closely woven and the tissue paper very fine.

 100111_Bookcloth_15
Finally, remember to clean your iron after use.  You may have adhesive on it, which will transfer to anything else you iron – potentially causing a lot of damage.  If you plan on making heat-bonded bookcloth, buy a good cleaner for your iron sole-plate.  Alternatively, buy a new iron and commandeer the old one for your craft room!

* * *

100111_Bookcloth_16  100111_Bookcloth_17
Finished bookcloth pieces.  All these were made by the bonded method described in this tutorial.  I have used many of these pieces very successfully in my bookbinding.

100111_Bookcloth_18
Fronts and backs of some silk bookcloth.  You can not see the adhesive on the front of the silk.  It also does not fray (as I found out when I tried to make my favourite frayed-edge quarter binding!).
 
  100111_Bookcloth_19
Store your bookcloth flat, or loosely rolled.  Do not roll it tightly, squash it, or fold it, as you will spoil it.  As with paper, folded creases will not come out!

* * *

100111_Bookcloth_20  100111_Bookcloth_21
Red cotton bookcloth, used as a “quarter-binding”, with a contrasting paper on the cover-boards.

1210_Diaries 1210_Diary_Morris_5
Cotton and silk bookcloths, used to make bindings for some diaries this Christmas. The yellow cotton was woven with golden thread in one direction and red in the other, giving a lovely and interesting effect.  I frayed the edge to show this off.
 
* * *

I hope that this tutorial will be useful to someone.  I have enjoyed writing it – hopefully you’ve enjoyed reading it too!

16 comments:

  1. Thanks for the tutorial, I'll be bookmarking this one! I've been trying to get up enough nerve to try this. Your instructions seem very clear, so I think I may be able to handle it. :)

    ReplyDelete
  2. Brilliant Lizzie...I forgot about WonderWeb...I'm going to look for some here in India! To see how cheap it is. I'm also going to book mark this lovely tutorial for future reference. Thanks very much for doing this. I know how much time these things take but it is lovely to see free tutorials online. Sharing is good. As is the passing on of techniques.
    Love and Lentils
    {*}

    ReplyDelete
  3. Great tutorial, I have never used this type of adhesive to make bookcloth, it seems as if it works well. Thank you.

    Richard

    ReplyDelete
  4. I did my first ever bookbinding in December and loved it so this tutorial was great. You explained it so well. Thanks!

    ReplyDelete
  5. This is how I make book cloth, and it works great! Opens up an entire fabric world of possibilities. Thanks, Lizzie!

    ReplyDelete
  6. Useful Books said...
    This is how I make book cloth, and it works great! Opens up an entire fabric world of possibilities. Thanks, Lizzie!

    It certainly does! I've been able to use all sorts of fabrics, that are either not offered as ready-made bookcloth, or are very pricey if they are ready-made (ie. silks!). The glue is very good and doesn't damage even soft, silk-satin - though I have yet to try it with very fine fabrics.
    Glad to have someone else's confirmation that this is a great way to make bookcloth!

    ReplyDelete
  7. Thanks for this tutorial, Lizzie! It's such a great idea. I use heat-and-bond all the time for sewing so I'm thinking to myself "why didn't I think of that?!?!" :o)

    This may come in handy as I have been asked to do my niece's wedding guest book in a few months and her wedding color is a dark plum - something I'm not sure I'll be able to find in a book cloth. Now I know how to make my own, thanks to you! xo

    ReplyDelete
  8. I'm not sure if this is a technique I'll ever try, but I found it fascinating to read about :-) Really enjoyed your tutorial!

    PS You asked about my mini easel? It came free with a tiny canvas I picked up at a craft show, I think from Crafty Individuals. It would be worth looking in a place like The Works though, I got a bigger easel from there for my 12 by 12 layouts and they may well do small ones - and they're cheap!

    ReplyDelete
  9. Thanks for the info!Love that fabric too!

    ReplyDelete
  10. This looks like a very good idea. I usually use the old-fashioned method but may be it's time to change.
    Thanks for the information.

    ReplyDelete
  11. Oh Lizzie this is Fabulous news because I have used bondaweb previously to bond fabric hearts to card. I have fabric and bondaweb in abundance which I now find I can use to make bookcloth, I cannot tell you how happy this makes me feel!!!.....

    Kind regards, Jacqueline at Blue Anchor Bay xxx

    ReplyDelete
  12. Great tutorial! I can't wait to try it. Thank you.

    ReplyDelete
  13. Looks a great tutorial Lizzie, thank you so much. I have all the materials and can't wait to try it out!

    ReplyDelete
  14. i went out and bought some wonder under (they didn't have the other stuff you used) today after reading this tutorial. i'll try it tomorrow.

    i really like the red quarter binding and the print on the cover of that one - how do you attach the quarter binding? is it just glued over the paper? is there any risk of it peeling off since it's not really wrapped around the edge or tucked in?

    ReplyDelete
  15. Hi Leah, thanks for the appreciative comments!

    Actually "wonder under" is the same as "bondaweb" - it's just brand names.

    And the quarter binding you asked about is part of a Case Binding. The spine is constructed as part of the whole case, before the stitched book block (pages) is attached. Therefore, the fabric / leather is turned in, over the edges and fixed firmly to the spine stiffener (if one is used - there were none in the examples here) and the cover boards.
    You can add an extra panel of fabric / paper over the spine after binding, but it would need to be carefully trimmed and attached - and firmly stuck - with care.
    Hope this helps.
    Lizzie

    ReplyDelete
  16. Thank you so much. I've recently become curious about bookbinding since I would love to put together a book of children's stories for later, now while I'm thinking about doing so. This should help :)

    ReplyDelete

I love to read your comments!

LinkWithin

Related Posts Plugin for WordPress, Blogger...